College of Engineering, Informatics, and Applied Sciences2020-2021
Department of Civil Engineering, Construction Management, and Environmental Engineering
Environmental Engineering, Bachelor of Science
This program provides a strong foundation in engineering and design principles and applies biological, chemical and physical content to technical problems in water and wastewater engineering, air quality and pollution control, waste management and public health. Students graduating from this program can design solutions to complex environmental problems and are prepared to become registered professional engineers specializing in environmental engineering in their future careers.
This program is accredited by the Engineering Accreditation Commission of ABET, www.abet.org.
What Can I Do with a Bachelor of Science in Environmental Engineering?
Society’s demand for essentials such as clean air, food and water, sustainable land use and consumer products pose large-scale, practical problems. Environmental engineers use engineering, biological and chemical principles to design and operate pollution control and impact mitigation systems. Learn to be part of the solution to some of society’s greatest challenges when you study environmental engineering at NAU. Taught by faculty who are also registered professional engineers, you will have multiple opportunities for undergraduate research and hands-on experience, including coursework in our four-year Design4Practice program. This program leads to exciting careers in the public or private sectors where you can make a difference.
Career opportunities that might be pursued:
- City or county planning agency
- Construction firm
- Consulting engineering firm
- Federal or state agency
With further education, one of these paths is possible:
- Environmental engineer
- Researcher Environmental
- Policy analyst
- University professor
To receive a bachelor's degree at Northern Arizona University, you must complete at least 120 units of credit that minimally includes a major, the liberal studies requirements, and university requirements as listed below.
- All of Northern Arizona University's liberal studies, diversity, junior-level writing, and capstone requirements.
- All requirements for your specific academic plan(s).
- At least 30 units of upper-division courses, which may include transfer work.
- At least 30 units of coursework taken through Northern Arizona University, of which at least 18 must be upper-division courses (300-level or above). This requirement is not met by credit-by-exam, retro-credits, transfer coursework, etc.
- A cumulative grade point average of at least 2.0 on all work attempted at Northern Arizona University.
In addition to University Requirements:
- At least 57 units of preprofessional requirements
- At least 50 units of major courses
- Up to 9 units of major prefix courses may be used to satisfy Liberal Studies requirements; these same courses may also be used to satisfy major requirements
- For this major the liberal studies prefix is CENE
- Elective courses, if needed, to reach an overall total of at least 129 units
Please note that you may be able to use some courses to meet more than one requirement. Contact your advisor for details.
|Minimum Units for Completion||129|
|Highest Mathematics Required||MAT 239|
|Additional Fees/Program Fees||Required|
|University Honors Program||Optional|
|Accelerated Undergraduate/Graduate Plan||Optional|
|AZ Transfer Students complete AGEC-S||Recommended|
|Progression Plan Link||View Progression Plan|
This program may lead to licensure.
Society’s demand for essentials such as clean air, food and water, sustainable land use and consumer products pose large-scale, practical problems. Environmental engineers use engineering, biological and chemical principles to design and operate pollution control and impact mitigation systems. Environmental engineering is a newer engineering discipline, growing out of civil and chemical engineering. This exciting engineering field requires a solid understanding of core concepts including mathematics, physics, chemistry, biology, statics, thermodynamics, surveying, and fluid hydraulics. These courses serve as a basis for advanced content in:
- Air quality, emissions and pollution control (sampling, modeling and the design of devices to remove particulate and gaseous pollutants)
- Water and wastewater quality and treatment (sampling, modeling and the design of biological/chemical/physical treatment methods for large and small communities)
- Hazardous and solid waste engineering (site assessment, risk assessment, remediation methods, landfill design)
- Environmental health (toxicology, industrial hygiene, ecological impacts)
Student Learning Outcomes
Upon completion of the degree, students will have the ability to:
- Identify, formulate, and solve complex engineering problems by applying principles of engineering, science, and mathematics.
- Apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare, as well as global, cultural, social, environmental, and economic factors.
- Communicate effectively with a range of audiences.
- Recognize ethical and professional responsibilities in engineering situations and make informed judgments, which must consider the impact of engineering solutions in global, economic, environmental, and societal contexts.
- Function effectively on a team whose members together provide leadership, create a collaborative and inclusive environment, establish goals, plan tasks, and meet objectives.
- Develop and conduct appropriate experimentation, analyze and interpret data, and use engineering judgment to draw conclusions.
- Acquire and apply new knowledge as needed, using appropriate learning strategies.
This major requires 110 to 112 units.
- Preprofessional Requirements: 60 to 62 units
- Major Courses: 50 units
Take the following 110 - 112 units:
Preprofessional Requirements (60-62 units)
Mathematics and Science courses (39-41 units)
- BIO 100* or BIO 181* (3 units)
- CHM 151*, CHM 151L*, CHM 152*, (CHM 230* or CHM 235*) (11-12 units)
- ENV 115 or GLG 115 or GSP 365 (3-4 units)
- MAT 136*, MAT 137*, MAT 238*, MAT 239* (15 units)
- PHY 161*, PHY 262* (7 units)
Engineering Science courses (18 units)
Major Courses (50 units):
- CENE 150*, CENE 150L*, CENE 270*, CENE 280*, CENE 281L*, CENE 282*, CENE 330, CENE 332*, CENE 333*, CENE 333L*, CENE 335*, CENE 336*, CENE 410L, CENE 431L, CENE 434, CENE 480 (37 units)
- CENE 386W* which meets the junior-level writing requirement (3 units)
- (CENE 476* and CENE 486C) together meet the senior capstone requirement (4 units)
Select Technical coursework from the following (6 units):
*Prerequisities to Engineering coursework that must be completed with grades of "C" or better. In addition, ENG 105 must be completed with a grade of "C" or better.
You may not have more than one grade of "D" in your required engineering, mathematics, and science courses.
If you wish to enhance your education in the area of civil engineering, chemistry, mechanical engineering, or mathematics, you can easily pursue a minor in each discipline with the addition of a small number of courses and by consulting with the respective disciplinary advisor.
Our overarching learning goals are stated as our Program Objectives; within three to five years of obtaining a bachelor's degree, a graduate is expected to achieve the following:
- Be employed in the engineering field or pursuing a formal academic program of study;
- Have a demonstrated commitment to life-long learning by participating in professional development activities;
- Be a registered professional engineer or be in the process of becoming a professional engineer;
- Demonstrate leadership through increasing responsibilities; and
- Engage in activities that benefit others outside of their employment.
Accelerated Bachelor's to Master's Program
This program is available as an Accelerated Undergraduate/Graduate Plan. Accelerated Programs provide the opportunity for outstanding undergraduates working on their bachelor’s degree to simultaneously begin work on a master’s degree. Departments may allow students to complete both degrees in an accelerated manner by approving up to 12 units applicable toward both degrees. Students must apply to the accelerated program and the master’s program by the application deadline, and meet all requirements as listed on the Accelerated Bachelor's to Master's Programs to be considered for admission. Admission to programs is competitive and qualified applicants may be denied because of limits on the number of students admitted each year. Be sure to speak with your advisor regarding your interest in Accelerated Programs.
Additional coursework is required, if, after you have met the previously described requirements, you have not yet completed a total of 120 units of credit.
You may take these remaining courses from any academic areas, using these courses to pursue your specific interests and goals. We encourage you to consult with your advisor to select the courses that will be most advantageous to you. (Please note that you may also use prerequisites or transfer credits as electives if they weren't used to meet major, minor, or liberal studies requirements.)
- PROGRAM FEE INFORMATION
Program fees are established by the Arizona Board of Regents (ABOR). A program fee of $425 per semster has been approved for this program.
Be aware that some courses may have prerequisites that you must also take. For prerequisite information click on the course or see your advisor.
Go to mobile site